The DS Series consists of the DS Detector (light gray) and the DS Detector (black) specifically designed for Request-to-exit (REX) applications. With. Buy BOSCH SECURITY VIDEO DS Security Series, High Performance Request to exit Detector (NA): Household Sensors & Alarms Great REX device. The DS/ is a passive-infrared (PIR) detector designed for request to exit pattern provides dense C-shaped coverage ideal for most REX applications.
|Published (Last):||26 August 2016|
|PDF File Size:||20.99 Mb|
|ePub File Size:||12.53 Mb|
|Price:||Free* [*Free Regsitration Required]|
If the detector activates and the door is open when 10 sec remain on the timer, fs160 sounder turns on. Route the wiring through the base before mounting the base to the wall or ceiling.
2.0 Installation 1. Remove the cover using a small flat blade screwdriver. Figure 2: Cover Removal
Lays Into the Ceiling Grid. Skip to main content. This, combined with the ability to monitor the door and intelligently control the lock, adds considerable security to these types of applications.
A built-in sounder can be automatically activated if the door is propped open. Refer to Sections and on page 4 for more information. Disabling the Request-to-Exit 4. Do not scratch the lens when removing the.
Refer to the magnetic lock s documentation for more information. The sounder remains on until the door closes or by someone moving in the field of view. These instructions do not purport to cover all details or variations in equipment nor to provide every. The Request-to-Exit device shall not be connected directly to a tex for access control function.
Bosch DS Request to Exit Motion Detector REX Access Control 60 Day Returns | eBay
ds60 Please enter a number less than or equal to 6. Shipping cost cannot be calculated. Panic hardware must be used with this or any other egress device.
Back to home page. Twist counter-clockwise until detector become loose from base. It operates in conjunction with the Access More information. Use a drill to remove a screw knockout in the cover only, then start screw and tighten to secure. Secure the Detector Rotate 4 ft 1.
Add to watch list. Select a valid country. Then press on the center of the until it snaps into place. A brand-new, unused, unopened, undamaged item in its original packaging where packaging is applicable.
Please enter a valid ZIP Code. In addition, complete pattern control allows it to be adjusted to a single zone or placed over a doorknob, for example. When using the optional trim plate TP or TPrun the wiring through the trim plate and into the base before mounting the base and trim plate onto a single gang electrical box.
Bosch DS-160 REX PIR Motion Detector
Replace the cover and secure with a screw. If using the R input to activate the detector, switch 2 should be set in the ON position resettable mode. The sounder will turn on as long as Terminal R is open. The junction box is universally compatible with. Keycard Reader Configuration UL listed magnetic locks typically are rsx EMF spikeprotected, and therefore do not require the bridge rectifier or diode as shown in Figure 10 and Figure For DIP switch settings, refer to Section 4.
Section – Wiring More information. If the detector is activated and the door opens, then closes, the relay rez out after 2 sec. When Switch 2 is off, toggling the keycard input does not restart the timer.
The sounder remains on until the door closes or the d160 activates.